Restore the floor.Keep your facility running.
Large-area concrete grinding, coating removal, joint repair, polishing and resurfacing for manufacturing facilities, warehouses and commercial properties — headquartered in Georgia, traveling nationwide.
JK Total Solutions has run interior construction, remodeling and field service work on Georgia job sites for 15+ years. Industrial Re-Flooring is our specialist division for the concrete you already own.
Is your floor costing you time?
A worn industrial slab is not a cosmetic issue. It shows up as unplanned maintenance, damaged product, slower material handling and an expensive replacement conversation you did not budget for.
Replacement is not the only option. Most of the industrial floors we look at can be restored: strip what failed, repair what moved, re-flatten the surface and re-finish the concrete already in place — without demolition and without pouring a new slab.
See the full restoration scope →- Forklift-damaged joints
- Dusting concrete
- Failed coatings
- Cracks and spalling
- Worn industrial slabs
- Uneven surfaces
- Unplanned maintenance
- Production downtime
The same bay, restored
Drag the handle. Same camera position, same racking, same forklift lane — the difference is coating removal, joint repair, diamond grinding and finishing.
No demolition. No new slab. No cure window holding up your schedule.
See how it is done →Original illustration of a typical restoration sequence. Replaced with JK project photography as documented projects complete.
A defined restoration sequence, not a guess
Every project follows the same eight steps. Click through to see exactly what happens on your slab and what you get at each stage.
Slab assessment and documentation
We walk the floor with the facility team, record slab condition, joint damage, coating type and moisture indicators, then map the area into workable zones.
- Existing coating identification
- Joint and crack mapping
- Slab hardness and profile check
- Zone and access plan
Coating and contaminant removal
Failed epoxy, paint, thinset, mastic and sealer are mechanically removed with HEPA dust extraction so the slab is clean and open before any repair work.
- Mechanical removal — no uncontrolled dust
- Epoxy, urethane, paint, adhesive residue
- Continuous vacuum containment
Joint, crack and spall repair
Forklift-damaged joint edges, spalls and cracks are cut, filled with semi-rigid material and ground flush so wheel traffic stops accelerating the damage.
- Joint edge rebuild
- Semi-rigid joint filler
- Spall and pop-out patching
- Crack routing and fill
Large-area diamond grinding
Planetary grinders with progressive diamond tooling flatten the surface, open the concrete and prepare a consistent profile across the whole area.
- Progressive metal-bond tooling
- Surface flattening
- Consistent profile for the chosen finish
Chemical hardening
A densifier is applied to harden the slab surface, cut down dusting and improve abrasion resistance under forklift and pallet traffic.
- Reduced dusting
- Higher surface abrasion resistance
- Better long-term cleanability
Polish, grind & seal or coat
Depending on the facility, the floor is resin-polished to the target gloss, grind-and-sealed for an economical industrial finish, or prepared for a coating system.
- Polished concrete
- Grind & seal
- Coating-ready surface profile
Guard and line work
Protective treatment is applied where required, and traffic markings or safety lines are re-established before the zone is handed back.
- Stain-resistant guard
- Traffic and safety line layout
- Zone handover checklist
Maintenance plan
We hand over a written maintenance routine so the facility team keeps the finish performing instead of re-entering the damage cycle.
- Cleaning method and chemistry
- Inspection interval
- Re-burnish / touch-up guidance
Industrial Re-Flooring scope
We are not only a concrete polishing company. We assess, remove, repair, grind and finish existing industrial floors end to end.
Concrete Grinding
Large-area concrete grinding and surface preparation.
View service →Coating Removal
Remove failed epoxy, paint and industrial coatings.
View service →Polished Concrete
Durable, low-maintenance polished concrete floors.
View service →Grind & Seal
Practical and economical industrial concrete finish.
View service →Joint & Crack Repair
Repair forklift-damaged joints, cracks and spalling.
View service →Concrete Resurfacing
Evaluate restoration or resurfacing before full replacement.
View service →Floor condition self-check
Tick everything you can see on your slab today. The tool maps your conditions to the restoration steps a real site assessment would look at.
Downtime & phasing planner
Facility managers do not ask "how much per square foot" first — they ask "how long is my floor out of service." Move the inputs to see how area, access and shift choice change the plan.
How this is calculated: planning-only assumptions of roughly 1,800–3,000 sq ft per 8-hour crew day depending on scope, reduced for restricted access and adjusted for the work window. It is a scheduling sketch, not a quote. Real duration is set on site after slab hardness, coating type and moisture testing.
Facilities we restore floors in
Manufacturing Plants
Concrete wear, joint damage, dust and coating failure inside running production.
See approach →Warehouse & Distribution
Forklift damage, joint failure, dusting and surface wear across large slabs.
See approach →Automotive Suppliers
Large floor areas, schedule pressure, cleanliness and durability requirements.
See approach →Battery & EV Suppliers
Clean, dust-controlled slabs and coordinated work in new and expanding plants.
See approach →Work planned around production
Facility managers do not buy grinding. They buy a floor that gets fixed without stopping the plant.
- Phased workThe area is split into zones so only part of the floor is out of service at a time.
- Night workCrews mobilize after the last shift and hand the zone back before the first.
- Weekend workLarger areas completed across a weekend window with no weekday impact.
- Planned shutdownsScope sequenced into an existing maintenance shutdown you already scheduled.
- Zone-by-zone restorationContainment and HEPA extraction keep adjacent operations running.
Fifteen years of Georgia job sites behind the division
JK Total Solutions has been on Georgia job sites for about 15 years across interior construction, remodeling, specialty access work and property services. Industrial Re-Flooring is the new specialist division built on that field experience.
Fast local decisions
A Georgia crew and a Georgia decision-maker. No waiting on a national office to approve a schedule change.
Field discipline
Site safety, PPE, containment and clean handover — the habits that come from 15 years of running occupied job sites.
Documented scope
Written floor condition report, defined work sequence, clear schedule. Nothing decided by guesswork.
Bilingual coordination
English and Korean support for Korean-owned manufacturers operating in Georgia.
Georgia base. Nationwide reach.
Our base and fastest response is the North Georgia manufacturing corridor. Beyond it, we mobilize traveling crews for projects anywhere in the United States — multi-site programs, out-of-state plants and corporate rollouts included.
Hover or tab through the map to see response phase by city.
What facility managers ask first
Do we have to shut the plant down?
In most facilities, no. Work is planned zone by zone with containment and HEPA dust extraction, and we schedule around your production windows — night work, weekends or planned shutdowns. The phasing plan is agreed before mobilization.
How do you control dust inside a running facility?
Grinding and coating removal are performed mechanically with industrial HEPA vacuum extraction connected at the tool, plus containment at the zone boundary. That is what makes restoration possible next to live production lines.
Can the existing floor be restored instead of replaced?
Very often yes. Replacement means demolition, disposal, new slab and long cure time. Restoration removes the failed layer, repairs the joints and cracks, re-flattens and re-finishes the concrete you already own. The assessment tells you honestly which one your slab needs.
What does a free floor assessment include?
A site walk with your facility team, documentation of slab condition, joint and crack mapping, coating identification, a zone and access plan, and a written floor condition report with a recommended scope and schedule.
Do you work as a subcontractor for general contractors?
Yes. We handle industrial flooring scope for GC and design-build partners, with clear communication, documented schedules and field execution that keeps your overall program on track.
Is Korean-language support available?
Yes. Initial consultation, site walk-through and coordination can be handled in Korean, with English quotations and field documentation for the plant's US-side stakeholders.
Georgia 공장 바닥,
한국어로 먼저 상담하세요
Georgia에 진출한 한국계 제조기업의 산업용 콘크리트 바닥 복구와 Industrial Re-Flooring을 지원합니다. 초기 상담은 한국어로, 견적과 현장 문서는 영문으로 제공합니다.
한국계 제조업체 페이지 →Start with a free floor assessment.
Tell us the facility type, approximate square footage and what the floor is doing today. We will walk the slab, document the condition and come back with a scope and schedule.